단순히 전후 위치만 바뀌는 것이 아니라 조금 더 좌측으로 사이드 스탠드가 위치하면서 지지력이 매우 강해진다. 다만 단점이라면 순정 사이드 스탠드로는 지지가 불안하다 순정을 더 짧게 가공하던가 본인처럼 조정식 사이드 스탠드를 장착하여 짧게 조정하여야 한다. 잘만 조정하면 좌우로 기울어진 도로 어디에서든 안정적으로 주차가 가능하다. 사실상 별 5개를 줘도 충분하지만 순정 스탠드와의 조합이 만족스럽지 않기에 4점을 준다.
View Detail
- Instock
283.5 MYR (9,900 JPY)
Webike Point: +99 pt
(2.83 MYR)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
Installation time:0.3h
Machining of cowls, etc: No
Material: Iron (black paint finish)
Product Description: Refer to the instruction manual
1 month (or up to 1000km of driving distance after installation)
**Not available for installation: (CT125, Hunter Cub ('20.6-'22.12) [JA55-1000001-].
*(*1) Please note that the in-house test is a comparison based on certain conditions and is not the same as the guarantee or conditions in actual use.(Loading capacity and stability conditions vary depending on the carrier used and the location of where the bike is parked.)
*When installed with Endurance rear suspension, the bike height will be lowered and the bike will be inclined at a shallower angle (about 9 degrees).
*Since stability varies depending on the slope of the parking area and loading conditions, please be sure to confirm that the bike is stable before using this product.
*This product is designed for stock vehicles and is not recommended for use on vehicles that have been modified in terms of ride height.
*There may be changes in product specifications due to the manufacturer's reasons.
.
Reinforced (stabilized) side stand bracket for CT125 and Hunter Cub.
With the stock sidestand, if the bike is loaded with a large amount of cargo, the front tires may lift up and become unstable, causing the bike to tip over onto the sidestand.
Therefore, this product is designed to be more stable when loaded on the rear rack by adjusting the position of the side stand and the tilt of the bike.
Also, the side stand switch, which is a safety device, can be installed as it is without cancellation by using the stock side stand.
In our in-house test at Endurance, when 50kg was loaded on the back of the bike on a flat concrete surface with the right side stand, the stock side stand lifted the front tire and the bike tipped over, but this product provided sufficient enhanced stability.*1
・Can be installed together with the right side stand kit (JA55/65).
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CT125・CT110 HUNTER CUB 22- ('22.12-)[JA65-1000001-]
Installed on: HONDA CT125 Hunter Cub
New Custom Articles
