KITACO Axle Collar/Rear/Silver
Using 25mm longer Axle Shaft and this collar from KITACO, you can extend the Nut part to the outside of Swing Arm.This allows the double nut to be fixed with a sufficient tightening torque.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
KITACO Wide Chain Guide Plate
When I FrSprocketUP, it seems to hit in NORMAL.Because it was cheaper than other companies.
KITACO Drive Sprocket (Front)
The combination of Fr and Rr Sprocket is up to the rider's preference and I'm happy with it for suburban and long distance riding.From spring to early summer, I will go to the mountains to pick wild v...
KITACO Exhaust Spring Set (with Anti-vibration Rub...
This is a purchase for Replacement.I was wondering if it would be more economical to purchase the Spring and Anti-Vibration Lara Bar set. This time, the cut end of the rubber is straight, and I wonder...
KITACO Meter Protection Film
If it's about protection, I'm satisfied, but the quality is not very good.No matter how you crimp it, the edges will still float.I feel that the price is a little high because I feel like I want to re...
KITACO Front Sprocket
420 SizeDownConversion from 428 Size of NORMAL to 420 SizeDownConversion using Seal chain. 16T was selected for 125cc Bore up and Rear was 36T.
KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
When you order PCX160 compatible MORIWAKI mufflerIt said Gasket in the item section at the bottom.I just misunderstood and pressed "pop" to order.……Gasket for MONKEY, GORILLA and SUPER CUB arrived!I d...
KITACO Universal Mirror Holder
The Tap is for mounting the Mirror, but the screw that clamps to the Handlebar is M5 and the tightness is weak, so the Mirror turns at high speed.I have no use for anything but a moped.It was a bad id...
KITACO Super Fuel Hose Set
The DrainHose was dirty, so I bought it FOR REPLACEMENT.It is a tube with high Gasoline resistance, and this tube is soft to some extent, and it is a purchase because the evaluation seemed to be good....
KITACO Exhaust System Gasket (1 Set of 2pcs.)
I purchased this product as a for replacement because I removed the Silencer from my NSR. When installing the silencer, temporarily tighten the screws of the silencer and bracket until it closes light...
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
KITACO Hollow Axle Shaft
I bought this Shaft which is 25mm longer under the neck than the Axle Shaft I was currently using.The combination of G-CRA Swing Arm + for MONKEYTakegawa hubIf the Axle Shaft is over-tightened, the ti...
KITACO Stainless Clutch Cable (for Standard Holder...
Large satisfied with the very good finish and feel of operation.
KITACO Body Guard
PartsThey're pretty effective against theft, aren't they?It is good Point that there are two kinds of Bolt and Nut side.However, depending on the mounting part, you may have to buy both, so it's not v...
KITACO Big Foot Pedal
Installed on JC92.The deciding factor for this purchase was naturally the appearance.There are a lot of colors, and all of them are metallic color, so it is possible to change the impression of the ap...
KITACO Short Reach Lever Set
MONKEY125Clutch is too far away, so I changed it.As a result, the Clutch lever is now closer, making it easier to connect and half-clutch.This is a Recommendation for the Smaller Hands!Height, 153cm.G...
KITACO Hollow Axle Shaft
I was so impressed with the Front that I thought I would eventually get the Rear.To the uninitiated, I couldn't tell the difference as much as Front. LOL.Tire is removed and Chain adjustment is a litt...
KITACO Monkey-for Engine Cheat Sheets (Waist Under...
The Kitaco SERVICE MANUAL for CRANKCASE is worth it's weight in Gold. The information in it is transferable to ANY horizontal Honda style engine. Printed in Japanese with more than enough English capt...
KITACO Joint Funnel
With PC18, there is quite a bit of space between the OEMAir cleaner and the carburetor.At that time, this funnel or joint is used to connect the OEMAir cleaner and the carburetor.good pointYou will be...
KITACO 12WAY Attachment (for Φ16/12V MONKEY)
I used it for DAX during Restore.This is because I wanted to shift the angle of the carburetor to put on the Powerful.The new Parts stood out on the worn out vehicle, but I was able to shift it as des...
KITACO LIGHT 75cc Piston Kit
I bought this as Spare parts as I am currently running a 75.It's not likely to break, but just in case.good pointIf your cylinder is large and sturdy, you can use it all the time by changing the pisto...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
KITACO Tappet Adjustment Wrench
Useful tool, works with 8mm and 9mm adjustment nuts, and 2 types of adjustment screws.It is a handy tool and works with 8mm and 9mm Adjustment Nut and two types of Adjustment Screw.
KITACO Oil Jug 1 Liter
I used it to replace the OIL on my MONKEY125.MONKEY is 900ml, so this product is easy to use because the scale is in 100ml increments.What I'm interested in.Nozzle is too long.The netting on the nozzl...
KITACO Torque Wrench 380mm3/8 DR10-30N
[How is it used?Was the one you received as per Image? YesHow was your experience with it? The best[Points to note] NoneHow did it compare to other products?Other items that would be helpfulInstallati...
KITACO Crankshaft Assembly Tool
Worked as described. Once crank bearing installed in crankcase, this tool allows you to pull the crank through the bearing. Tool rests on inner bearing race so no damage to balls or races.
KITACO Replacement Tool (FF Spring)
I'm trying to replace the spring on the front fork of my Grom.PurchasedThe texture is excellent and there is a detailed Instruction Manual.Grom front fork spring replacement on YouTubeThere are some o...
KITACO Oil Jug 3L
[How is it used?I bought this for Gasoline refueling at Circuit.I use it to calculate fuel consumption and to set the fuel to the smallest limit before the Race.Was the one you received as per Image?I...
KITACO Flywheel Puller
Have used this Kitaco flywheel puller a few times now to remove the rotor on the Honda Grom and Monkey 125cc motorcycles with great success. This tool is very easy to use and does a great job of relea...
 | ||
| |
![KITACO [K/TOUR] Helmet holder](http://img-webike-370429.c.cdn77.org/photo/impression/d3/d37c94430e7c1ac28e4edd3c5e63c74aM.jpg)
KITACO Helmet Holder
I put it on my CBR250R.I was able to attach it well by looking at the Instruction Manual.When the key is turned, the Hook descends with the Pattern and can be hooked easily.It's very easy to use.
KITACO Helmet Holder
I bought this because it was hard to get the Helmet into the compartment under the Seat.Installation is easyBecause of the low mounting position, the Helmet is closer to the ground.
KITACO Helmet Holder with Mirror Holder
On all the Motorcycles I've ridden recently, I've always put a Helmet holder in this position.So I bought and installed it on the for GPZ900R again.The CB400SB was the same, but with a motorcycle with...
KITACO Helmet Holder
Basically, I put the Helmet under the Seat, but if you go shopping or something, this holder is very useful.It was easy to installIt may not be a good idea to leave the Helmet attached to the Holder.
KITACO One-Touch Helmet Clip
I was able to easily install and remove it from both the Jet and AGB Full face types of Bell and AGB with one touch. Apart from being a bit heavy, it's well worth buying.
KITACO Helmet Holder
It is easy to install and fits perfectly because it is only for ADV150This motorcycle has a small Helmet in, so it's hard to store the Helmet since things tend to happenThe Helmet holder is very usefu...
KITACO Helmet Holder
The helmet holder is in the Rear Sets, but to be honest, it is difficult to use, so I bought it It wasIt takes a little bit of effort to support it because it is sandwiched between the Frame and Tande...
KITACO Helmet Holder
In the GSX250R and NINJA, you can remove the Tandem seat and use the Seat lock It's a way of securing a helmetIn Touring and so on, you can't use it if you put a Back on it, it's going to be a Large w...
KITACO Helmet Holder
The Helmet holder on the back of the OEM Seat is completely uselessI'd love to see this one adopted as an OEMIt opens from the top when you unlock itNot applicable, but I have it on my MT-03
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING