[How is it used?
In Replace from VANVAN200 OEM. For elbow angle and other improvement purposes due to tendonitis. I tried European2 type before this, but it was too narrow and not high enough for me. I tried the European2 before, but it was too narrow and not high enough for me.
Was the one you received as per Image?
Chrome plating is clean and as expected.
Was the installation difficult?
Accuracy is good, no particular problems.
How was your experience with it?
VANVAN, but personally, I think it is important to have an Adventure type? w maneuverability and to be able to swing it around from the Front to some extent, but if it is too wide, it will be Minus in terms of tendonitis measures. So the best balance between the two was this for me:Handlebar width 740mm. The handlebar width is 740mm, and the handlebar height is 700mm, which is a difference of 20mm on the One Side.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it was too "Up" in terms of image and looked tacky, but I thought it was fine for VANVAN. If you are looking for practicality, I think it is the best.
As I mentioned in my review of another Handlebar Brace, I was having trouble finding the correct width for the HURRICANE Handlebar Brace that I installed at the same time. Since they are from the same manufacturer, it would be great if you could just list the typical brands that are compatible with the HURRICANE Handlebar Brace.
- Instock
116.71 MYR (4,085 JPY)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MONKEY
84-07 (Z50J-1600008-,AB27-1000001-1899999)*Requires top bridge H30 holder or MONKEY handlebar holder|*Requires throttle cable routing change.
-
FTR223
(with side numbers) *Processing of switch holes required
-
GRASS TRACKER Big Boy
09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Side caps can be used as stock.
-
GRASS TRACKER
09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed.
-
GRASS TRACKER
-08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
-
Universal
Product detail
Handlebar color: Chrome plated
[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 175mm
Full width: 740mm
Effective width of holder installation part: 130mm
Pullback size: 185mm
Insertion angle: 25 degrees
Forward leaning angle: 70 degrees
*
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types..
For the list of optional parts such as cables
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:SUZUKI GRASS TRACKER Big Boy 09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable., HONDA FTR223 (with side numbers) *Processing of switch holes required, Others Universal, SUZUKI GRASS TRACKER 09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed., SUZUKI GRASS TRACKER -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
May 29, 2022
Fits:SUZUKI GRASS TRACKER Big Boy 09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable., HONDA FTR223 (with side numbers) *Processing of switch holes required, Others Universal, SUZUKI GRASS TRACKER 09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed., SUZUKI GRASS TRACKER -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
Nov 9, 2019
Just the right Handlebar Up Type
The CB750KZ's OEM Handlebar is pulled large in front and has a strong aperture The shape is similar to the shape of the so-called "Handlebar" of White Bay Generally speaking, it is an easy position, but it is a little bit hard for Small students who have an elbow joint pain was a hard angle So I wanted to change the handlebar with the easy position as it is I changed to HURRICANE European 4 which is similar in width As I expected, the load of the elbow is reduced, but the position change is bigger than I expected
View DetailNew Custom Articles
