About quality and texture
В коробочке оригинальная иридиевая свеча для оборотистых моторов, керамическая часть отлично запрессована в основание, шов покрыт тальком, что говорит о оригинальности свечи, идеально ровный иридий и ответная часть, полностью параллельны, в отличие от подделок
Долговечность таких свечей проверена временем и составляет около 20-30 тысяч километров
About the feeling of use
После установки можно не переживать, что при высоких оборотах двигателя свеча расплавится, так как она рассчитана на высокие нагрузки, высокие температуры и обороты, маркировка #8 отлично подходит для высокой температуры в камере сгорания после установки спортивной выхлопной системы, а также с использованием с гоночным CDI
Также использование возможно как со свечными колпачками под широкий колпачок свечи, так и под резьбовую часть, путем откручивания бочонка на конакте свечи зажигания
Products to buy together
Совместно с этим продуктом ничего не требуется покупать
Difficulty of installation
Простая установка, необходим гаечный ключ #19, достаточно удалить старую свечу и установить новую, соблюдая силу затягивания резьбы
Cost performance and comparison with other products
Низкая цена, нет конкурентов по качеству
About shipping and packaging
Стандартная упаковка в оригинальной коробке плюс тубус защищающий резьбовую часть
Any concerns, cautions, or advice when purchasing
Подбирайте свечи зажигания учитывая рекомендации производителей к калильному числу, либо же рекомендации сторонних производителей зажигания
----------------------------------------------------------About Quality and TextureIn the box, the original iridium candle for reserved engines, the ceramic part is perfectly pressed into the base, the seam is covered with talcum, which indicates the originality of the candle, perfectly even iridium and the return part, are completely parallel, unlike fakesThe durability of such candles is tested by time and is about 20-30 thousand kilometersAbout the Feeling of UseAfter installation, you can not worry that at high speeds of the engine, the candle will melt, since it is designed for high loads, high temperatures and speeds, marking #8 is great for high temperature in the combustion chamber after installing a sports exhaust system, as well as using a racing. CDIAlso, use is possible both with candle caps for a wide cap of candles, and under the threaded part, by unscrewing the barrel on the hollow of the spark plugsProducts to Buy TogetherTogether with this product, nothing needs to be bought Difficulty of InstallationSimple installation, you need a wrench #19, it is enough to remove the old candle and install a new one, observing the strength of the thread tighteningCOST Performance and Comparison with Other ProductsLow price, no competitors in qualityABOUT SHIPPing and PACKAGINGStandard packaging in the original box plus tube protecting the threaded partAny Concerns, Countions, Or Advice When PurchacingSelect the spark plugs given the recommendations of manufacturers to the potion number, or the recommendations of third -party ignition manufacturersPowered by Google Translator
- Instock
43.29 MYR (1,515 JPY) 61.43 MYR Save 30%
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
HABANA50
99- [Required number]1
-
Mojito50
99-03 [Number of units required]1
-
HABANA Custom50
99- [Required number]1
-
DRUG STAR
96-97 [Number required]1
Product detail
[Stock number] 1161
[Shape] Terminal separation type
[Size]
Screw diameter: Φ14.0mm
Screw length: 12.7mm
Hexagon dihedral width: Hex 20.8mm
[NGK part number] BPR8HIX
[Type] Iridium IX Plug
Plug unit and terminal image: [3-a] See Image 6
[Heat Value] 8
[Compatibility Information] YAMAHA Stock Part Number Compatibility: 90793-20103/90793-20166
**Even if you purchase in units of 10 pieces (1 box), it will not be delivered in 1 box.
*Terminals, tightening angle, etc. may differ depending on the model.Please refer to the link for the detailed fitting and installation instructions..
* The image is only for reference. The image shown may differ from the actual product.




Webike has all NGK plugs in stock! .
* The item may be temporarily out of stock due to manufacturer shortages, etc
[Features]
1. Improved acceleration
You can feel the difference between this plug and the standard plug by its quick response to the accelerator pedal opening.Changing to Iridium plugs will improve acceleration.
2. Engine power pup
Iridium plugs increase engine performance.You can enjoy a comfortable ride with a strong power on the uphill.
3. Improved ignitability and startability
Iridium plugs have ultra-fine electrodes that ignite quickly and improve the starting performance of the engine.The idling is stable because of less spark variation.
4. Increased fuel efficiency
Iridium plugs have excellent ignitability, so they burn gasoline efficiently.This plug is both economical and environmentally friendly.
As a premium plug for stock engines, an ultra-fine iridium alloy has been adopted for the central electrode to achieve superior ignitability and greatly improved response.The electrode is thin and sparks fly easily, so the energy is large and the ignitability is improved.It maximizes the performance of the engine.In addition, the thermo edge at the tip of the insulator burns off the attached carbon (burnt debris), prevents the ignition performance of the plug from deteriorating, and maintains high performance.
[Features of Iridium IX plug]
Iridium IX plugs are high performance plugs with a faster combustion spread than general plugs and with a thermo edge at the tip of the insulator to improve plug fouling.
Iridium alloy is used for the center electrode.
The electrodes are finer than those of platinum to improve the ignition performance.In addition, this plug is resistant to carbon contamination by the thermo edge effect.
・The center electrode is very thin and the tip of the outer electrode is tapered.
・Easy to spark and excellent in ignition performance.
・The engine has improved starting performance, acceleration, idling stability, and fuel consumption.
・Since the flame damping effect of the plug electrode is reduced, the ignition performance is improved.
*The effect varies depending on the vehicle.
[About the shape of the plug terminal]
●Select a terminal shape that matches the engine and plug cord installation side.
There are three types of plug terminals: integrated type, separate type, screw type, and punch-and-caulk type.
Mainly, "integral type" and "punch caulking type" are used for four-wheeled vehicles and "screw type" for two-wheeled vehicles, and "separate type" is available for plugs used for both four-wheeled and two-wheeled vehicles.
In addition, the terminal part of the "separate type" can be removed, but the terminal part of the "integrated type" and "punch-and-caulk type" cannot be removed.If you try to remove it forcibly, the terminal part may be broken.
In case of using the "separate type" as the "screw type", remove the terminal nut.
When using the product with the terminal nut attached, make sure that it is not loose, and if it is loose, tighten it lightly with pliers or the like.
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
![]() |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
![]() |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
![]() |
■ Flashover |
■The advantages of the plug |
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.