Design - Build. Can be used without problems.
Especially, rattling etc etc. Because there is no uncomfortable sound by
As expected, it was a correct answer to purchase.
Traded in from an acquaintance who was considering the RearCase and bought it by size mistake (Repurchase) I did
They were considering a design that wasn't too round and not too angular, and they were one of the candidates As I said, I was really confused by the Balance of the width and B47 on one size, but the actual product I had to check it out and it was a good size to fit the Bag that I'm using now to hold my A4 documents I made the decision to get it
Actually, when I bought the Scooter, there is storage under the seat and if you use the Backpacketc No problem, he was the one who thought it was ugly to install the Top case
When I installed it, I personally like it, and I think it's a good choice for the Large size and balance I am satisfied with it
Dedicated Base installation is available for Hexagonal Wrench, Socket and Small The Phillips Screwdriver makes installation a snap you can remove the Case by touch, so you can use it flexibly It's one thing
By the way, in my case, when I look at the Mirror in the rear view, I can easily see the rear view without getting reflected in the mirror I'm happy with the width of my concern because I can do itView Detail
I made it to TECHSmoke of UnpaintingBlack.
Image suitable for RepsolColor does not come up ... Consideration for sharing with another Motorcycle later.
Because the surface is a rough, satin finish, it is a drawback that Dust etc. enters and cleaning is troublesome.
The shape around the Stop lamp is good because the Edge can be heard, but it is a regrettable feeling that condensation has formed from the skimmer.
Although I used E33 point in the past, there was resistance to Mono Lock type in the difficulty of hooking while driving and the hook when opening and closing, but the lock system adopted from B37 is wonderful! I stab the key [OPEN] In state, you can open and close with Lock button only.
Key [OPEN] It can not escape as it is, [LOCK] Since it will have to be, inadvertently there is Risk which inadvertently puts the key inside while locking. (By all means, I want you to improve)
And ... Is it an influence of the mounting angle of the carrier, can not hold in the open state, the lid falls when you release the hand. (How many times have my hands caught ... and it hurts anything other than that)
Also, since the unevenness inside is worrisome, I'm happy if Panel interior that makes Flat to Option is also available.
I was worried about E43NL which seemed to have a high Square appearance and loading capacity, but I felt uneasy about the rear vision with a horizontal overhang as well as B47, I think that 250ccClass was the best choice.
View Detail
【What made you decide the purchase?】
I bought it for my family.
As I had GIVI 's 30 L and 47 L' s,
Inevitably it became the thing of GIVI, I thought that it is good that I can also use if there is 37L in between.
Families' vehicles are Slim vehicles, so about 30 liters looks and ease of use is just right for day trips, but I felt that the capacity was small when it was over night. My 47 L thing rubs Large and my usable thing is gone, so I took the middle and made it to 37 L.
【How was it actually used?】
Compared with 30 L it looked a bit Large and I felt Balance was not good.
However, it does not mean that Large is too much, and personally it is acceptable to the appearance.
Since capacity has increased, course of luggage can be thrown in, of course, so convenience is good,
Weight increases as you put luggage, so in Winding a bit Smooth is gone.
Not worried except when you do not put much baggage or Winding.
【Was it difficult to install? (Hard parts case)】
There was not anything difficult as it was just attached to Base that was originally installed.
If you have installed even BOX, it's very convenient because you can freely change Box.
However, since the Base of Mono-lock and Monokey are different, I think that it is better to align them with the same Type.
【Please tell me the point of installation and hang (in the case of Hard parts)】
When attaching the Base, I think that it is good to install the gold pieces horizontally and vertically so as not to shift vertically and laterally, respectively.
I think that it can be mounted more firmly than making it difficult to shift only in one direction.
[Is there anything I was disappointed about?]
It is the same shape as just the 47L thing already has a different capacity, so there was not any problem.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I feel GIVI's thing has many strange designs.
I think that one that matches any car with a bit more calm design is good.
【Have you compared items?】
There is none.
View Detail
In order to do Tandem this time, it also serves as the back purpose.
I bought it.
Large Kimono is just right, it looks cool and looks satisfying.
It's not a rounded design, it's a bit angular and Edge works
Design is very cool.
Lens is Smoked lens Cool and cool.
Because I bought a dedicated Base it is very easy to remove with One-touch.
There was a little resistance in the Top case
This is coolly satisfying.View Detail
It might be the best part to be troubled if there is not this.
Size also does not extend beyond the car body exactly Helmet + Alpha goes in.
The difficulty is that mounting of Base is troublesome and carrier is scratched. Guard with Tape so that Wound does not stick.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING