539.86 MYR
(17,250 JPY)
5 (6 Reviews)
Excellent
Why did not you buy it soon!Purchased like Hara 2.
Until now, I used Side Stand and stayed on the wall
Let me hang it and remove Rear tire
I wish I could buy it sooner.
Large type has for Hook bolt, but it does not match
So it was impossible.
I use mind more than HookBolt type,
If Hara 2, the car body is also light, there is no problem even for one person.
To do.
Pretty Maintenance has become easier.
In addition to tackle Front and Rear suspension
Is it Jack?
Reviews For ETHOS Mini Double Caster Rear Stand Rubber Arm Set From Other Webike User
Excellent
It's a must if you're going to do the maintenance yourselfFirst, look for a Type that has a Bobbin attached to a Swing Arm and lifted by a Y-shaped Arm But I couldn't find anything to fit the groms This Rubber arm lifted Type is simply a Square Type bar with Rubber is wrapped around the Swing Arm (which is also square like a grommet) You only need to lift it up by hooking it on the It is not
In terms of actual use, Quantity:Pair (for Left and Right) You don't have to worry so much about positioning the Once it's up there (if the ground is hard and flat, we're concrete), it's very stable and First of all, stand upright so that you don't feel like you're going to fall down, and then you can do the usual things like cleaning the Chain and lubricating it It is already useful for maintenance and installation of custom parts I'm there We're still very new to the process, but if you're going to start working on it, this is the kind of Rear You should definitely get a stand, I think you should get a STAND to lift your car upright and keep it upright It's kind of nice just looking at them!View Detail
Excellent
It's a must for maintenanceOf course, the oil exchange is used in HondaGROM It is useful in Maintenance, Chain exchange, and Sprocket exchange
The stability is also safe to useView Detail
Very Good
With Affordable SizePurchase for Grom without Center Stand.
Thanks to a simple structure and a quadruple Caster with Bearing, it lifts with a light force.View Detail
Excellent
Ideal for MaintenanceI think that I did a good shopping.. Cost performance is also good, even though Side Stand has no problem, I use this easily and are using it for Maintenance and Custom easily.View Detail
Most Viewed Reviews Of ETHOS Rear Stand
Excellent
Dream rear standVery well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this productView Detail
Excellent
I think it looks sturdy and has good cost performance.The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.View Detail
Excellent
It's a must if you're going to do the maintenance yourselfFirst, look for a Type that has a Bobbin attached to a Swing Arm and lifted by a Y-shaped Arm But I couldn't find anything to fit the groms This Rubber arm lifted Type is simply a Square Type bar with Rubber is wrapped around the Swing Arm (which is also square like a grommet) You only need to lift it up by hooking it on the It is not
In terms of actual use, Quantity:Pair (for Left and Right) You don't have to worry so much about positioning the Once it's up there (if the ground is hard and flat, we're concrete), it's very stable and First of all, stand upright so that you don't feel like you're going to fall down, and then you can do the usual things like cleaning the Chain and lubricating it It is already useful for maintenance and installation of custom parts I'm there We're still very new to the process, but if you're going to start working on it, this is the kind of Rear You should definitely get a stand, I think you should get a STAND to lift your car upright and keep it upright It's kind of nice just looking at them!View Detail
Excellent
Satisfaction over functionIt had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in
What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with
How was your experience with it?
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
Chain cleaning and grease up is now easier, so I have to do it more often than before Maintenance
The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about!View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING