CB750FC. NSR250R (MC21) Although it operates without any problems, this time when installed in FIMONKEY, even if you do not press Switch, HeaterON arbitrarily leaves the LEDs on LeftGrip disappeared.
First of all Controller is currently pushing for replacement, but we have received confirmation of lot number and attached vehicle but we have tried 3 weeks but still no answer.
I'd like to return and replace with Controller and LeftGrip set!
Installation & operation of CB-F and NSR 250R Performance ☆ 5, but because it is badly supported ☆ one!
As winter is finally here, I decided to install these heat grips so as to avoid the need to use thick gloves. Installation was a hassle as most of the fairings and the oil tank had to be removed in order to conduct the installation. The grips heat up rather quickly and stay rather hot. I usually tune to the lowest setting as it is more than enough for my riding environment. The one thing I dislike about it is that there is no indicator light to tell me which setting I am at. Sometimes I have to set it a few times before I can set it to my desired level.View Detail
加热把手还没有装,因为买回来后发现还缺少对应的附件,要买对应摩托车型号的附件才能装上去,因此已经下单了,要等附件到了后才知道使用的效果,到时候安装好了后再一起评价,不过从表面上来看,东西的做工还是很不错的,唯一让我有点不满意的就是电源线是跟着把手一起转动的,是否会影响把手的操作感,还需要安装上了后通过时间来检验!Heating the handle has not been installed, because the purchase back found that the corresponding attachment, to buy the corresponding motorcycle model accessories can be loaded up, so has been a single, to wait until the attachment to the use of the effect, then installed after the evaluation, but on the surface, the work of things is still very good, The only thing that makes me a little dissatisfied is that the power cord is rotating with the hands, whether it will affect the operation of the handle, but also need to be installed after the time to test!Translated by Microsoft TranslatorView Detail
This the genuine Honda Accessory for Heated grips. The product arrived well packaged and in fine shape. Japan Webbike is a great site to order accessories for the CB1100 and I wish there were products available!View Detail
I installed it in MT-07
I was able to install the Throttle without any adjustments.
You need Harness which is sold separately, I used one for CB1300. Was it too long? There is no problem in operation.
Only the Coupler part that takes the Attachment power needs to be processed.
I think it is a very good product because the thickness of the Grip remains the same, the Indicator is unobtrusive and I got used to pressing it quickly.View Detail
When you think of Grip heater, you think of this Sports GripHeater!
I trust it so much that I use it on my Ducati Diavel and bimota DB9.
Even if it's not winter, I use it easily when my hands and body are cold, such as on the mountain, early morning in autumn, or in the rain.
In the winter, it will keep you warm even over Warm Gloves.
After all, it is the same diameter as the standard, the grip feeling is not spoiled, and the operation is simple and clear.
This Sports GripHeater is recommended for the Grom JC92 because the Honda OEM Product is a disappointing Spec. that only heats up half a lap.
Unfortunately, there is no dedicated product for JC92, so it will be a diversion for FORZASi.
Manufacturer part number is
Grip Heater Body:08T50-MGE-000
Mounting Attachment:08T70-K04-930
It may be quicker to have it installed at Dealer etc., but the Shop where I bought my Grom was no good because of low Kill of electrical installation. There are a lot of people who don't even understand the meaning of bach power supply or are afraid to do it.
Please note that there are some staffs who do not understand what they are doing.
When installing on a Grom, care must be taken unlike a Large Motorcycle.
? It is better not to take power directly from the vehicle Accessories power supply.
⇒ If used in conjunction with a smartphone power supply, etc., you will certainly experience bodywork problems due to lack of power. EngineCheck and so on.
⇒ Let's get a proper bach direct power supply at this time.
⇒ It is strongly recommended to change to LithiumBattery (HJTZ7S-FP) because the standard Battery (YTZ5S) cannot keep up with the charge.
The Grip for the Mini bike is narrow, so the protruding Switch part gets in the way.
Make sure you position the ⇒LeftGrip's Switch properly before you plug it into the Handlebar.
Make sure to apply the ⇒Grip adhesive.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING