181.2 MYR
(5,790 JPY)
163.99 MYR
(5,240 JPY)
(9% OFF)
5 (10 Reviews)
Excellent
BeautifulIt is in use at GORILLA, it is terribly easy to see if it is attached to the place of the Neutral lamp where it is easy to see because the installation position is not found, but Neutral can not be seen? (The bath water temperature gauge is longer for viewing time)
I do not know whether the digital impression is taking out from Drain, but it seems that the Digital meter is like a slow reaction, but if you are cruising like Bypass or Pass, you can react well, since it is taking out from Drain Oil when you exchange It takes time and effort to install Minus 1 star tokyo
Reviews For DAYTONA AQUAPROVA Compact Oil Temp Meter From Other Webike User
Excellent
Very goodI am very satisfied with this product, regardless of its appearance and its physical size, and the display is also very clear, the last thing is to see how accurate and durable it is.View Detail
Excellent
Compact size is goodUsed as water thermometer
I like the Simple functionality of the temperature display only.
Compact size does not spoil the aesthetics of the steering area.
(I hate messes.)
I like that the power supply is not battery-powered.
The drawback was the price, as I needed not only the Body but also the Screw Diameter Conversion Adapter for Sensor installation.
Since this is an old car, it is mentally reassuring to be able to visually see the water temperature.
Now we just need to see how durable it is.View Detail
Average
It is an ordinary Oil Temperature Meter.Before changing the viscosity of the engine oil, the oil temperature should be at least,...
I'll have to measure it ^_^.
The Temperature Sensor is the oil temperature at the drain bolt and oil pan of the engine oil.
When the temperature on the Oil Temperature Meter was 65°C, I drained the oil and measured the drained oil with an Analog stick thermometer and found that the values were almost the same, so I think accuracy is not a problem.
There are no particular problems, except that deciding where to install the meter and taking out the power supply is a hassle.
The problem is that the Sensor fitting Gasket washer (18mm inner diameter), which is sold separately, was not stocked in stores at the supply store.View Detail
Excellent
Small but functional.We installed a water temperature gauge because the OEM does not have one.
Waterproof and power from the vehicle body are absolute prerequisites.
Many other products are large in size, and I was worried about whether to use a handlebar for the installation position, but this product is compact and can be installed in a small place as shown in the picture.
There are no switches, etc., and the display is simple and always on.
It has an alert function that illuminates the Back lamp in Red color when the temperature is below 5 degrees and above 120 degrees.
I was looking for a simple and compact meter, so this was the ideal product for me.
The display is easy to read and the Gold amount is low.View Detail
Excellent
I installed an oil cooler to manage oil temperature.I installed the oil cooler for ZX-11 which I won a bid for at Yahoo auctions. I also thought about StickType for its simplicity, but the unit price is the same as the StickType, so I bought the AquaProba + Drain bolt. If there is a wire for the ACC system, you can get it from anywhere. If you have that much knowledge, you can install it easily. Since there is no comparative testing machine, the accuracy is confirmed by feel.View Detail
Most Viewed Reviews Of DAYTONA Oil Temp Gauge
Excellent
Very goodI am very satisfied with this product, regardless of its appearance and its physical size, and the display is also very clear, the last thing is to see how accurate and durable it is.View Detail
Excellent
Compact size is goodUsed as water thermometer
I like the Simple functionality of the temperature display only.
Compact size does not spoil the aesthetics of the steering area.
(I hate messes.)
I like that the power supply is not battery-powered.
The drawback was the price, as I needed not only the Body but also the Screw Diameter Conversion Adapter for Sensor installation.
Since this is an old car, it is mentally reassuring to be able to visually see the water temperature.
Now we just need to see how durable it is.View Detail
Average
It is an ordinary Oil Temperature Meter.Before changing the viscosity of the engine oil, the oil temperature should be at least,...
I'll have to measure it ^_^.
The Temperature Sensor is the oil temperature at the drain bolt and oil pan of the engine oil.
When the temperature on the Oil Temperature Meter was 65°C, I drained the oil and measured the drained oil with an Analog stick thermometer and found that the values were almost the same, so I think accuracy is not a problem.
There are no particular problems, except that deciding where to install the meter and taking out the power supply is a hassle.
The problem is that the Sensor fitting Gasket washer (18mm inner diameter), which is sold separately, was not stocked in stores at the supply store.View Detail
Excellent
Small but functional.We installed a water temperature gauge because the OEM does not have one.
Waterproof and power from the vehicle body are absolute prerequisites.
Many other products are large in size, and I was worried about whether to use a handlebar for the installation position, but this product is compact and can be installed in a small place as shown in the picture.
There are no switches, etc., and the display is simple and always on.
It has an alert function that illuminates the Back lamp in Red color when the temperature is below 5 degrees and above 120 degrees.
I was looking for a simple and compact meter, so this was the ideal product for me.
The display is easy to read and the Gold amount is low.View Detail
Excellent
I installed an oil cooler to manage oil temperature.I installed the oil cooler for ZX-11 which I won a bid for at Yahoo auctions. I also thought about StickType for its simplicity, but the unit price is the same as the StickType, so I bought the AquaProba + Drain bolt. If there is a wire for the ACC system, you can get it from anywhere. If you have that much knowledge, you can install it easily. Since there is no comparative testing machine, the accuracy is confirmed by feel.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING