100.77~ MYR
(3,220 JPY)
4 (3 Reviews)
Average
It will look and feel like Race ish.It is a simple design Rim Tape, but it looks completely different with or without the tape. It takes a little bit of time to put it up, but after it's done, it has a race ish atmosphere and there is a lot of satisfaction.
Reviews For KAWASAKI Pinstripe for Wheel From Other Webike User
Very Good
ZrX1200R (2001) Reverse carZrX1200RLime green pasted on the vehicle. Rim tape is difficult to finish beautifully, but this Rim tape has Guide and it can be finished easily and beautifully.
For pasting method, hook Jack to Front and Rear, float Wheel, take oil and dust of Rim part and rotate Wheel using the attached Guide and paste Tape.
It is difficult to stick well if you do not hang Jack I think that there is nothing you can not do but if you do it yourself it would be better to prepare Jack and STAND.
Rim tape in the state Simple with Small letters (KAWASAKI) And I felt the Material was also very durable It did not seem to get peeled off even though it got wet but I wash it a couple of times but I do not like it at all.
Just Cost performance is bad It's a for 1 Wheel in one product, so you have to buy two 1 Set for 1 Vehicle, so it's expensive feeling.
A good thing is a little value but it is a recommended item for those riding Kawasaki car.View Detail
Excellent
It's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.
But what motivated me the most was the idea of decorating the wheel area. It's less expensIt's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.
But what motivated me the most was the idea of decorating the wheel area. It's less expensive than painting the whole wheel. And although it's just about adding a thin single colored line to the mostly black area, it changes the appearance drastically. I know that there are similar products of another brand, but I like this part for it has a small "KAWASAKI" logo on it, which is unique.
You better paste it with water. It says to refer to the website for further details, but to make the operation easier, you better have a rear stand and a front stand. It will take time even if you have all of those, and I think it's better for you to take your time. If you are not confident or if you don't have time, you might as well consult an expert for this operation.
It maybe counted as a sticker tune-up, but still, it's more expensive than other products. 3M decal sheets tend to be this way. I think it is better than to have a cheap product that gets off easily, but each person may have different views.View Detail
Most Viewed Reviews Of KAWASAKI Wheel
Very Good
ZrX1200R (2001) Reverse carZrX1200RLime green pasted on the vehicle. Rim tape is difficult to finish beautifully, but this Rim tape has Guide and it can be finished easily and beautifully.
For pasting method, hook Jack to Front and Rear, float Wheel, take oil and dust of Rim part and rotate Wheel using the attached Guide and paste Tape.
It is difficult to stick well if you do not hang Jack I think that there is nothing you can not do but if you do it yourself it would be better to prepare Jack and STAND.
Rim tape in the state Simple with Small letters (KAWASAKI) And I felt the Material was also very durable It did not seem to get peeled off even though it got wet but I wash it a couple of times but I do not like it at all.
Just Cost performance is bad It's a for 1 Wheel in one product, so you have to buy two 1 Set for 1 Vehicle, so it's expensive feeling.
A good thing is a little value but it is a recommended item for those riding Kawasaki car.View Detail
Excellent
It's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.
But what motivated me the most was the idea of decorating the wheel area. It's less expensIt's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.
But what motivated me the most was the idea of decorating the wheel area. It's less expensive than painting the whole wheel. And although it's just about adding a thin single colored line to the mostly black area, it changes the appearance drastically. I know that there are similar products of another brand, but I like this part for it has a small "KAWASAKI" logo on it, which is unique.
You better paste it with water. It says to refer to the website for further details, but to make the operation easier, you better have a rear stand and a front stand. It will take time even if you have all of those, and I think it's better for you to take your time. If you are not confident or if you don't have time, you might as well consult an expert for this operation.
It maybe counted as a sticker tune-up, but still, it's more expensive than other products. 3M decal sheets tend to be this way. I think it is better than to have a cheap product that gets off easily, but each person may have different views.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING