28.79 MYR
(920 JPY)
26.29 MYR
(840 JPY)
(9% OFF)
5 (6 Reviews)
Excellent
Quantity:It says "Set" but it is 1 pc.[How is it used?
I purchased this for SpokeMaintenance on my SEROW225.
A friend of mine told me how convenient it was.
Was the one you received as per Image?
The Image is a good size and is more massive than I had expected. It is a good size that fits comfortably in your hand.
How was your experience with it?
It's 1 pc and supports MultiSize. 'Um, how many millimeters is this?' Checks like this are unnecessary.
The work is well done because the Size is heavy and comfortable in the hand.
And when I checked the condition of the Spoke, it turned out to be quite damaged. It is time to replace it....
[Points to note]
Because of the multi size, if the angle to the spoke edge gapes a little, the top of one size can be used. If this happens, a strong stress will be applied to the edge of the spike, which may cause the spike to be snagged. Make sure that the size of the spike is properly matched before you work on it.
The product Title is Wrench set." but it is 1 pc.
How did it compare to other products?
Since this is the first time, no comparison has been made.
Reviews For KITACO Combination Spoke Wrench Set From Other Webike User
Excellent
Kitaco Spoke Wrench I bought this Kitaco spoke wrench tool with intention of tightening the spokes on my 1987 TW200.TDub front and rear spoke nipples needed size is 5mm.This spoke wrench has 6 sizes.Number #3 slot direct fit for the TDub OEM spoke nipples.This tool was able to tighten the spokes on both wheels.. The wrench is pretty easy to use,little heavy but lightweight and very easy to carry on.Four years back I purchased Dachi stainless steel spokes set from webike for the front wheel of my bike.Dachi made spoke nipples a tiny bit differently than factory spokes set and So I can Use Number #6 slot Instead of Number #3 slot. if you are a do it your-selfer like me this tool works just fine.anyone want to lace brand new spokes into a wheel or plan on loosely snugging up all the spokes before having the wheel trued,this spoke wrench might do the trick.I also get enough leverage since I'm only tweaking the spoke a half to a quarter turn at a time.I think this wrench well made of quality steel.when you touch this product you can feel it.this time took only 3days to received the package after dispatch from japan.Exceptional Service.Thanks A lot WEBIKE.Highly Recommended !!!View Detail
Very Good
Must-have for regular spoke maintenanceChecking and tightening your spokes is important yet frequently neglected. Throw this in your cart and check the spokes before every ride for your safety and the longevity of your wheels.Finally caught these in stock. There is a reason for this demand. It fits any spoke you may have without having to change tips..a great tool for your toolbox. works pretty well and is small enough to keep in your pack.not as good as designated sized spoke tools, but it works and is well built.View Detail
Excellent
Use it as a bean.[How is it used?
Purchased for Spoke maintenance.
Was the one you received as per Image?
It is a small size as shown in the picture.
How was your experience with it?
It can be used in a variety of sizes and is small, so it doesn't take up too much space in the tool box, which is great!
[Points to note]
Not particularly.
How did it compare to other products?
Thank God, because everything else is so expensive!View Detail
Most Viewed Reviews Of KITACO Nipple / Spoke Wrenches
Excellent
Kitaco Spoke Wrench I bought this Kitaco spoke wrench tool with intention of tightening the spokes on my 1987 TW200.TDub front and rear spoke nipples needed size is 5mm.This spoke wrench has 6 sizes.Number #3 slot direct fit for the TDub OEM spoke nipples.This tool was able to tighten the spokes on both wheels.. The wrench is pretty easy to use,little heavy but lightweight and very easy to carry on.Four years back I purchased Dachi stainless steel spokes set from webike for the front wheel of my bike.Dachi made spoke nipples a tiny bit differently than factory spokes set and So I can Use Number #6 slot Instead of Number #3 slot. if you are a do it your-selfer like me this tool works just fine.anyone want to lace brand new spokes into a wheel or plan on loosely snugging up all the spokes before having the wheel trued,this spoke wrench might do the trick.I also get enough leverage since I'm only tweaking the spoke a half to a quarter turn at a time.I think this wrench well made of quality steel.when you touch this product you can feel it.this time took only 3days to received the package after dispatch from japan.Exceptional Service.Thanks A lot WEBIKE.Highly Recommended !!!View Detail
Very Good
Must-have for regular spoke maintenanceChecking and tightening your spokes is important yet frequently neglected. Throw this in your cart and check the spokes before every ride for your safety and the longevity of your wheels.Finally caught these in stock. There is a reason for this demand. It fits any spoke you may have without having to change tips..a great tool for your toolbox. works pretty well and is small enough to keep in your pack.not as good as designated sized spoke tools, but it works and is well built.View Detail
Excellent
Use it as a bean.[How is it used?
Purchased for Spoke maintenance.
Was the one you received as per Image?
It is a small size as shown in the picture.
How was your experience with it?
It can be used in a variety of sizes and is small, so it doesn't take up too much space in the tool box, which is great!
[Points to note]
Not particularly.
How did it compare to other products?
Thank God, because everything else is so expensive!View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING