I bought these to fit Kellerman Atto front blinkers and rear brake light on my JB03 Monkey 125 and they work a treat. I only wish these came inside the box of Attos.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I bought these to fit Kellerman Atto front blinkers and rear brake light on my JB03 Monkey 125 and they work a treat. I only wish these came inside the box of Attos.
我的车子是Harley-Davidson的FATBOY,2019年款的。买这个连接片是给KELLERMANN号称全世界最小的转向灯,Bullet Atto用的。为了美观,先把它喷成了黑色。安装的时候需要调一下角度才能达到最佳效果。----------------------------------------------My car is a Harley-Davidson FATBOY, 2019 model year. This sheet is connected to buy KELLERMANN called the world's smallest turn signal, Bullet Atto used. For aesthetics, first spray it became black. The installation of the required adjustment to the angle in order to achieve the best results.Powered by Google TranslatorView Detail
Fits: Others Bullet Atto KELLERMANN, Others microS KELLERMANN, Others RhombusS KELLERMANN
I wanted to mount Barrett's Atoe directly on Cowl, but the length of the screw part was not long enough and I gave up. So I used this Adapter by shaving off the black part and extending the screw length by 5mm.
This is a great product and I am very happy with it. If there is such a thing - it is a product that can reach the itch of the User. In my case, I used it as a processing Base, but when it comes to make from scratch, I will give up.
I wasn't going to use it at first either, but I thought maybe it would be nice to have, so I bought it at the same time as the BlinkerBody.
It's not an expensive part, so if you don't plan to install Barrett Ato, you might as well buy it.View Detail
Fits: Others Bullet Atto KELLERMANN, Others microS KELLERMANN, Others RhombusS KELLERMANN
I wanted to mount Barrett's Atoe directly on Cowl, but the length of Screw part was not long enough, so I modified the Screw part of this Adapter (extended the Screw mountain by 5mm to the black part) and used it.
It is indeed a dedicated Option part. There is no sense of discomfort when connected. If only there was something like this! I became the processing Base, but if I were to make it from scratch, I would have given up. If you use it, you will feel the gratitude of many times of the price.
At first I wasn't going to use it either, but I thought it might be nice to have, so I bought it at the same time as the BlinkerBody.View Detail
Fits: HONDA MONKEY125 (JB02), HONDA CT125 (JA55)
Installation was pretty straight forward, just followed the Youtube video by Opmid for the 4 speed Monkey.The JB03 Monkdey 125 has a different temperature sensor so the connectors for this on the Opmid harness was not used. The most annoying part of the harness install was connecting the clutch switch signal wire to the starter relay. To make it easy I removed the battery and battery box/tray to get access to the starter relay.I used the following figures to configure the gear ratio on the Opmid multimeter:5.2 - 1st gear: 2.8465.3 - 2nd gear: 1.777 5.4 - 3rd gear: 1.315 5.5 - 4th gear: 1.034 5.6 - 5th gear: 0.8435.7 - 6th gear: noneThis worked a charm, every gear up and down while riding, the gear indicator showed the correct gear. Sometimes it gets confused when your revs are low and you change gears.The display is great, bright, easy to read in any light condition. I also purchased the matte non-reflective protective film and it helped with reducing glare. I am very happy with this Opmid multimeter, it's head and shoulders better than the stock one. Now to the "but"... no engine temperature. I'm still working out which option to take.View Detail
Because the protective film is cut almost exactly the same size as the face of the Opmid multimeter, the film edges will not lay flat if it's not set down perfectly. Opmid should have pre-installed these films on the multimeter at the factory, hence 4 stars.Onces you get it perfectly centered, the film is excellent. The matte, non reflective film I chose works great in sunny condtions. Great that you get 2 films in the pack, backup or just in case...I'd recommend it, a good way to keep the face from scratching and less glare from the sun. Just take your time installing and use painters tape to remove dust from the 2 surfaces before you lay it down and push bubbles out.View Detail
Bought this NGK Plug Cap to go with the SP TAKEGAWA Hyper Ignition Coil for my JB03 Monkey 125, seems like a pretty cheap performance upgrade. View Detail
Fits: HONDA MONKEY125 (JB02-1000001-), HONDA DAX125 JB04 (JB04-1000001 or later), HONDA LITTLE CUB (FI)(AA01-4000001-), HONDA SUPER CUB 50 (FI)(AA04-1000001-), HONDA SUPER CUB 50 (FI)(AA09-1000001-)
Bought this SP TAKEGAWA Hyper Ignition Coil and an NGK Plug Cap for my JB03 Monkey 125, seems like a pretty cheap performance upgrade. The ignition coil fits perfectly in the stock location, no modification neccessary.View Detail
I bought these to function as daytime running lights for my JB03 Monkey 125. They work great, and are super tiny. The only gripe I have is their colour is around 3000-3700 Kelvin, they're more yellow than my stock headlights. I'm still happy with my decision, as there is nothing on the market that is as bright and small as these Attos.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING