[Material] EPDM [Color] Black [Type] Penetrating type [Hardness] 40 degrees [Total length] 120mm [I.D.] Left: 22.2mm / right: 25.4mm [Maximum diameter] Approx. 33mm (ribbed part) [Specifications] Handle diameter standard size (22.2mm Φ) compatible [Quantity] 1 piece each [Country of manufacture] Japan
*In the case of a bike with a standard 22.2Φ handle, many bikes have a 22.2Φ handle on the clutch side, so a part with an inner diameter of 22.2mm is installed, and on the brake side, a part with an inner diameter of 25.4mm is installed because a throttle cone is installed. The brake side is equipped with a throttle cone, so the inner diameters of the two products are different.It doesn't mean mulfunction of the product and if you have any questions, please contact your local vehicle dealer or custom shop to have the grips installed. *If the handlebar is deformed due to a fall or use, the grip may not be able to be installed on.Please check the status of your vehicle beforehand and contact your local authorized vehicle dealer if you have any questions. *Please consider the final purchase of the product not only by looking at the compatibility information, but also by measuring the dimensions of each part with your own eyes, looking at the pictures of the product, and considering the balance when installing the product on your bike, interference with each part, etc. *There is a case that this product, which is a universal product, is difficult to fit or is loose depending on the handlebar used.In such cases, modifications are required to suit each bike. *This product is a universal product.The compatible models listed in the compatibility information are based on the overall grip length size and the model and year that uses the stock throttle pull-back 2-point wire system. *We cannot guarantee that all products are compatible with this product. *Images may contain other products. *There may be changes in product specifications due to the manufacturer's reasons.
The special grips (left and right hand set) have been developed with Kijima's special grip system to provide the best grip comfort for riders who are looking for a fun hobby, but who also value time performance and cost-effectiveness. The barrel shape is designed to fit in your hand, and the pillars are placed at both ends to prevent slipping, and the ribs are set in the center to prevent snagging. This is a product for you, a clever and smart person who never stands still, sometimes boldly, sometimes opportunely, and finishes the day converging the figures as much as possible according to your experience and physical strength. The grip is soft and resilient and has a hardness of 40 degrees, so it is recommended for riders who want to change the look by changing the grip design without changing the basic philosophy of the handlebar area by the basic grip hardness, and for riders who want to change the hard appearance of their grips because they have two rows of guides (grooves) for wiring. We also recommend this product for riders who want to change their current grips because they are worn out, sticky, or cracked after many years of use.
In addition, Kijima grips, the most cost-effective and reasonably priced of all visible consumable and custom parts for motorcycles, can be redesigned and replaced seasonally and at regular intervals, allowing you to face your beloved bike with a refreshed feeling of mental health.
[List of parts that are useful in combination with grips and parts that are helpful during installation] ・Kijima Part Number 30019: GRIP-IT TAINETS Grip-Bond (0.5oz (14.2g)) ・Kijima Part Number 201-595: Throttle Teflon Sheet ・Kijima Part Number 201-597: Grip spacer 26 x 50mm x 5t 2pcs) ・Kijima Part Number 201-5971: Grip spacer rubber (26 x 45mm x 3t 2pcs. set) ・Kijima Part Number 201-5972: Grip spacer rubber (26 x 45mm x 5t, set of 2) ・Kijima Part Number 201-598: Throttle assist (BK 35mm max.) ・Kijima Part Number 204-104: Bar End Nylon (Nikei 17-18mm White 2pcs) ・Kijima Part Number 204-1041: Bar End Nylon (NIKEI 14mm White, set of 2) ・Kijima Part Number 204-110: Bar End Nylon (Nikei 17-18mm Black 2pcs) ・Kijima Part Number 204-1101: Bar End Nylon (NIKEI 14mm Black, set of 2) ・Kijima Part Number 204-1316: Bar End Nylon (Small Head Black, Set of 2) ・Kijima Part Number 204-1318: Bar End Nylon (Big Head Black, Set of 2) ・Kijima Part Number 204-1340: Bar End Aluminum (Big Head Black, Set of 2) ・Kijima Part Number 204-1341: Bar End Aluminum (Big Head Red, Set of 2) ・Kijima Part Number 204-1343: Bar End Aluminum (Big Head Silver, Set of 2) ・Kijima Part Number 204-1344: Bar End Aluminum (Big Head Plated 2pcs) ・Kijima Part Number 302-2212: Wire Twister Auto Return (7inch) ・Kijima Part Number 303-145: Stainless wire (0.6 x 5m) ・Kijima Part Number 303-146: Stainless wire (0.8 x 5m) ・Kijima Part Number 303-147: Stainless wire (0.3 x 5m)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance.View Detail
Kijima made nice quality grip and good price. I like the this TZ style grip rubber. I need a closed ennd but Unfortunately I bought a open end. but still I can use my other bike, so I'm happy with this product.It;s old fashioned grip so rubber is kind a thinner compare with current styles grip in market.View Detail
Grip replaced on CT110 HUNTER CUB. At 110mm, it appears to be the same length as the OEM. When I put it on, it was a little short. The grip is very firm and absorbs the grip, and is a good change from the OEM off-road style grip. Touring applications will be improved.View Detail
Replaced Grip on CT110 HUNTER CUB. It is not too hard, not too soft, and has a moderate grip. The price is low, but the quality is absolutely fine. Recommended as a Standard Grip.View Detail
This is a grip that looks like something you've seen on a pad, but it's reasonable, and the feel is moderately moist and easy to grip. As a motorcycle for circuit use, I don't want to use my grip too much, so this grip is very good.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!