*It is necessary to remove the stock left side grip heater (HONDA PART No.35520-MLA-305) which is fixed with a strong grip bond when assembling the new REBEL 1100 at the HONDA stock from the stock handlebar. No.35520-MLA-305) and replace it with a new one depending on its condition.Even if you start the engine and warm up the grip heater to the maximum and pull it out, it is attached really tightly and it may fail in the process of removal.If it is difficult to remove the stock left side grip heater (HONDA stock parts No.35520-MLA-305), you need to purchase a new stock left side grip heater (HONDA stock parts No.35520-MLA-305) by yourself to install this product.In this case, there will be an extra stock handlebar and a stock left side grip heater (HONDA Parts stock No. 35520-MLA-305), which will be necessary to restore the vehicle to its original condition. *When you remove the stock left side grip heater (HONDA STOCK PART NO.35520-MLA-305), you may get burned, so please use the glove to protect your hand. *If the heater fails or is destroyed during operation, it must be replaced with a new one (HONDA Stock Part No. 35520-MLA-305). *This product does not require any changes to the hoses / harnesses / wires, but if you are concerned, please change the brake hoses to an appropriate length.The parking brake may need to be adjusted due to the change in handling. *Before purchasing this product, be sure to inform HONDA Dream shop to remove the stock left side grip heater (HONDA Parts Stock NO. 35520-MLA-305) and replace it with a new one depending on the condition of (HONDA Parts Stock NO. 35520-MLA-305), If it is difficult to remove the stock left side grip heater (HONDA Parts Stock No. 35520-MLA-305), it is necessary to prepare and install a new stock left side grip heater (HONDA Parts Stock No. 35520-MLA-305) to install this product. (Honda Parts Stock No. 35520-MLA-305), and that the tension of the parking brake needs to be adjusted, etc. to the appropriate length. *The thickness of the paint on this product may vary.There may be a dullness when turning to the axle side.In this case, it is necessary to adjust the product part of the handlebar by shaving with a file. *The punch marks on this product are for reference only.Please adjust the position of the handlebar to your liking. *The holes in the switch box of this product may be slightly out of alignment.In this case, it is necessary to widen the hole. *There may be changes in product specifications due to the manufacturer's reasons.
Compared to the stock handlebar parts, the handlebar has been moved back about 50mm in front and up 10mm to make it easier to ride, and a new color "matte black (no gloss)" has appeared! The matte black (no gloss) color fits the gear and heartbeat of the REBEL and emphasizes its originality!Stock wires and harnesses can be used as it is, and a collar is welded to the end section to accommodate the stock bar end installation. This product is about 50mm back and about 15mm taller than the stock handle. DCT model・Overall width: -5mm / Total Height: +15mm (Overall Width: )±20mm / height: ±40mm) There is no need to change the structure because it is within a certain range.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!