For brembo opposed 2P calipers Bracket: Machined aluminum Surface: anodised aluminium With SP Takegawa laser marking logo Caliper and sensor mounting bolts included
*A Brembo opposed 2P caliper (20. 6951 or 20. B852. 10) is required. *When using brembo calipers, you will need to purchase brake hose (500mm), banjo bolt (M10 x 1.25 / M10 x 1.0), banjo (side 45° / straight) and brake fluid separately. *Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
* The image is only for reference. The image shown may differ from the actual product.
This is the "rear caliper bracket kit" to install brembo's opposed 2P caliper on the monkey 125. By installing brembo's opposed 2P calipers, you can get a strong stopping power. In addition, this bracket is equipped with SP Takegawa's speed sensor installation part, so that it can be installed with the sensor at the same time without any discomfort. The bracket is machined from aluminum alloy (duralumin) to achieve high strength. The surface is anodized to improve corrosion resistance.
[Separately purchased parts when using brembo calipers] ・Brake hose (500mm): 06-080-0003 ・Banjo Bolt (M10 x 1.25) (Red Anodized) with Sealing Washer: 00-07-0122 ・Banjo Bolt (M10 x 1.0) (Red Anodized) with Sealing Washer: 00-07-0079 ・Banjo (side 45 degree) (blue anodized): 00-07-0089 ・Banjo (Straight) (Blue Anodized): 00-07-0006 ・Brake fluid (200cc): 06-08-0019
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
About quality and texture - Top quality. Beatuifully machined bracket here from Takegawa, light weight but super strong.About the feeling of use - Caliper mounted up with no issues and the operation of the caliper is perfect due to the well designed and produced bracket.Products to buy together - Takegawa list these parts to completed the rear caliper upgrade, Brembo 2P caliper 20.6951 and brake hose 500mm. Difficulty of installation - I found the install of just the bracket easy as the rear wheel only needs to be removed for access but for the entire upgrade to be completed difficultly level steps up to medium.Cost performance and comparison with other products - I find the rear caliper bracket a little over priced compared to the front bracket but this seems to be common with all brands. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan.Any concerns, cautions, or advice when purchasing - If you are looking to upgrade the rear caliper due to a lack in stopping power then adds this to your cart along with all the other parts required.View Detail
I bought this to replace the rear caliper with brembo. When I think only of Caliper support, it has been put on the market from various manufacturers, but in my case, it is necessary to change Speed sensor to Rear side from the reason of changing the number of guns of Sprocket with ABS, and because this was almost the only choice made by Mukawa, Caliper This is the reason why I chose the Caliper support made by Mukawa. If you have replaced the sensor, you only need this 1pc. bracket, so the appearance is also refreshed. The accuracy is not a problem at all because it is made by Mukawa of trust, and the core also came out to Beauty. I have also replaced the Swing Arm with a G-Craft one, but this can be installed without any problems.View Detail
I wanted to make SCRAMBLERSpec. in the new new Crab, so I used the Up type I was confused between Takegawa and Over It has sensor mounting holes, so I made this one It may be a problem with my mounting method or something from Caliper, Bracket, Rotor etc I don't know if it's just a matter of chemistry, but at first when stopping or applying Brake at low speed, there was a buzzing sound and vibration The Caliper became hot, and when I looked at the Rotor, I saw that the inside of the Rotor was not hit quite right, so I had to change the Pad I'm just checking the cutting process The noise is almost no longer audible, but compared to the Front (Front is the same new Crab) Caliper is a bit hot I'm going to give it a little more of a look Even in such a state, Brake works better than NORMAL If you don't remove one of the bolts and put the Caliper in parallel with the ground, the air won't come out I think it's a good ideaView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!