*Compatible models are confirmed by DAYTONJA, but are for reference only.Be sure to measure the hole diameter of the actual vehicle. *Φ14-Φ15 is not available because there was no applicable model when we checked with DAYTONA. [*This service is not available for the following vehicles*] ・No stem holes. ・The hole diameter of the stem hole does not match. ・Vehicles with handle post. ・There is an obstacle near the stem hole, and when you turn the handlebar, the hole is blocked.
*The CBR650R has a stem holeΦ19, but the top bridge is too uneven to be installed because the bar holder and the top bridge touch each other.Use 5mm spacers (not available from DAYTONA) and bar holders can be installed on the meter side.The front side is not suitable because it contacts the cover of the key cylinder.
I had no problems with the installation, but the Bolt seems to rust easily.
As mentioned in the Multi Bar review, the CBR650R has a recessed Stem Bolt that will interfere with the Top Bridge if installed as is. You can deal with it by putting a washer on it.View Detail
I bought this for my CBR650R in order to install their Mount. This model is not compatible with the CBR650R, but you can use two M16 washers to prevent the mount from interfering with the body. (Photo reference) Installation is so quick and easy, even a novice could do it! I've been using it for about 4 months now, and I haven't had any problems with it deteriorating or coming off, so I don't think it's a problem. There is nothing wrong with this, so I am a very Recommendation. I hope this helps those of you who have a CBR650R and are trying to install the same.View Detail
For co-tightening the mount bracket (sold separately) to the steering stem hole Parts I used them on my '90 CBR400RR The hole diameter is for 17-20mm Please note that this one will not work by itself
I have been using smartphone navigation in the Tank Bag The old Racer replica was hard to see due to the reflection of the sun, and the heat of the sun was making it hard to see, so we installed it The old Racer replica has a cowl bracket to the steering stem area There was a model of car, and I was anxious whether the Mount Kit could be used, but there is no problem in installation itself However, although it depends on the Mount Bracket, the operation of the Main key becomes very troublesome It was
I use it when touring on unfamiliar roads and in new places, but I usually remove it The Hexagonal Wrench 1 pc makes it easy to remove and install It may take a lot of vibration from the body of the car, but it is very useful View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!