CR-1 Modify is a racing stripe model of WINS CR-1 helmet with many functions that can be transformed into a full face or a jet.
■New feature!Equipped with push-button air ventilation
Front (chin) air ventilation with push-button ventilation.
The ventilation can be opened and closed by simply pushing the ventilation lightly, so you can easily open and close the ventilation according to the situation while riding.
■Matte titanium is used for ventilation and each part
The air vents and inner visor sliders are made of matte titanium for a luxurious feel.
*It will be painted.
■Six different helmet styles to enjoy
Modify also inherits its function!Change your form to match your mood or your bike that day!
If you purchase a shield kit for jet (sold separately) for modification, you can use it as CR-II specification (jet).A variety of styles can be created to suit your needs.
*When used with the jet type, there is no need to change the cheek pad.(Cheek pads for CR-II are not required)
■Flip Up System
The one-touch button makes operation easy to understand!
Unlock with one touch button.You can enjoy jet style up and down the face guard immediately.
*For your safety, we recommend that you close the face guard and visor while riding.
■Interior flexible size system
I'm worry about the size....I'd like to get a tighter fit.We responded to those voices!
The EPS (high compression sponge) is one size fits all, so you can change the size (M-XL) only by changing the interior.For example, you can easily change the size of your helmet if you wish it was one size bigger after you purchased it.
In addition, it is possible to customize the center part as L and the cheek pad as M.
■Pursuit of high safety The impact test has passed the new SG/PCS
The helmet standard has acquired the new SG/PSC (JIS2007 equivalent) with higher safety
The WINS Clown Helmet series has been certified with the new SG/PSC safety standard.
The inspection standard of the new SG standard is the same as the JIS2007 standard, which requires that the impact of dropping the product from a height of 2.5m be suppressed to 300G or less, which is a standard that requires high safety.
Shock-absorbing liner is also used for the cheek area, which is not a safety standard
More safety.Shock-absorbing liners are also placed inside the cheek pad pads.
Face Holding System Easy to wear, yet secure hold
The cheek pads protrude inward by 5mm when the face guard is lowered in order to improve the hold of the helmet.
*It may be difficult to remove the faceguard when it is lowered.
■Audio Jack Cable Holder
Equipped with audio jack cable holder
There is a cable holder on the chinstrap for the audio cable of a stereo or navigation system.
It prevents the audio cable from getting tangled inside the helmet and the pin jack from getting into the helmet.
It can also be used as a holder for extra chinstraps.
In addition, it is easy to attach the Soundtech because the Velcro material is used at the position where the inner ear touches.
Uses dual visor system
One-touch inner visor is available for sunny and dazzling days
6 different helmet styles to enjoy
6 types to choose from.Form changes to suit your mood and bike
CR-I can be used as CR-II specification (Jet) by purchasing a shield kit for Jet (sold separately).A variety of styles can be created to suit your needs.
*No need to change the cheek pad when using the jet type (Cheek pad for CR-II is not necessary)
Philip Up System
Unlock with one touch button.You can enjoy jet style up and down the face guard immediately.
*For your safety, we recommend that you close the face guard and visor while riding.
Interior Flexible Size System
I'm worry about the size....I'd like to get a tighter fit.We responded to those voices!
The EPS (high compression sponge) is one size fits all, so you can change the size (M-XL) only by changing the interior.For example, you can easily change the size of your helmet if you wish it was one size bigger after you purchased it.
In addition, it is possible to customize the center part as L and the cheek pad as M.
Compact size Can be stored in the met-in!*
Flip-up helmets are too big is a common belief!
The compact design of the WINS CR-I is small for a flip-up helmet and can fit in the met-in of most scooters.
*As of August 2010.(Confirmed only for current models)
*Some models cannot be accommodated.
Please check the size of the met-in beforehand
Pursuing high safety Impact tests clear the new SG/PCS
The helmet standard has acquired the new SG/PSC (JIS2007 equivalent) with higher safety
The WINS Clown Helmet series has been certified with the new SG/PSC safety standard.
The inspection standard of the new SG standard is the same as the JIS2007 standard, which requires that the impact of dropping the product from a height of 2.5m be suppressed to 300G or less, which is a standard that requires high safety.
Shock test
In the test, a human head model is set in a helmet and impact test is performed.
The resulting acceleration set at the center measures the amount of impact produced.
The smaller the value (acceleration G) is, the smaller the impact on the head in case of an accident.
Shock-absorbing liner is also used for the cheek area, which is not a safety standard
More safety.Shock-absorbing liners are also placed inside the cheek pad pads.
Face Holding System
The cheek pads protrude inward by 5mm when the face guard is lowered in order to improve the hold of the helmet.
*It may be difficult to remove the faceguard when it is lowered.
Air Ventilation System
Boldly equipped with large vents.
The air from the outside is introduced, and the inside is prevented from moisture.In addition, the pure black plating gives a sense of luxury.
Sound Off Smoothing
Minimizes wind noise at high speeds as much as possible
About sound-off smoothingIn order to reduce wind noise at ear as much as possible, a step was not made from a side of a shield to a body of a helmet and wind noise at high speed was reduced as much as possible.
Audio Jack Cable Holder
An industry first!Equipped with audio jack cable holder
Soundtech Cable Folder Audio cables for stereos and navigation systems.A cable holder is provided to avoid the risk of the cable being exposed and tangled in hair.
Of course, a material that sticks to Velcro is used where the ear contacts.
One side can also be used as a holder for an extra chinstrap.