*Refer to the instruction manual for the vehicle when removing and installing the air filter. *When you purchase the product, the filter part is already coated with filter oil.Please use as is. *For maintenance, the special maintenance kit (75274) sold separately is required.*Do not use chemicals from other manufacturers. *Images are for reference only. *There may be changes in product specifications due to the manufacturer's reasons.
[Features] ●This air filter is a stock replacement type. ●It can be installed regardless of the stock installed type (dry type or wet type). ●The filter has a three-layer structure. ・Woven cotton fabric: Daytona orange color for efficient air intake and dust collection. ・Mesh: Reinforced steel mesh with epoxy coating. ●The frame is made of special rubber that is resistant to deformation even at temperatures between -30 and 150 degrees Celsius. ●It will not tear even if you clean it with an air gun during maintenance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Mileage exceeded 15000 kilometers, Idling became slightly unstable and replaced after Plug replacement. OEM was also good, but if you use CleanerKit this item can be used repeatedly. Exchange was easy with just replacing with OEM. I am going to use it while maintaining at 5000 kilometers from now.View Detail
When changing Plug, Shop clerk, soon it was better to replace Air Filter, there is Ad Vise, I decided to make a variety of Manufacturer's, made by DAYTONA. The deciding factor is Cost performance. After installation, it will be a review after about two months have passed. I felt that I was wearing it because I also replaced the Plug, Smooth Dandruff. Especially now there is no problem. To install, remove Seat, raise Tank, remove Air Filter Cover, just replace. In the middle of the Air Filter Cover it stopped with Bolt, but at the beginning, I had a hard time to remove the existence of that Bolt, but I think that it could be exchanged in about 10 minutes without this. When I removed the old Air Filter, the inside of the BOX was cleaned because it was dirty with dust etc.. Excellent in Cost performance, I am satisfied with Large because it can be exchanged by pumping. View Detail
This air filter is made in Taiwan. After replacing the original air filter, the bike feels smoother to move. No more jerking, it moves smoothly.Hope it can last as long as the K&N model.Thank you.View Detail
About volume I changed from OEMAir cleaner to this Cleaner and The first surprise was that the volume of the exhaust sound became LARGER. I am satisfied with the sound as it is not as loud as a bomb. Since the air-fuel ratio has become denser, perhaps more fuel is used and the explosion sound has become LARGER?
Fuel Economy It has dropped, from refueling immediately after replacement to the present time. It is 2 km per liter less than before the replacement, so I am sure it will go down. I am a little dissatisfied with the fuel economy I want. I am disappointed that the opposite was true, as I thought that purchasing this product and increasing air intake would increase fuel economy. But the fuel economy just dropped to 30→28, so even at 5,000 km, there's only one refueling difference. Maybe there's no point in worrying about it. I wonder if it takes longer to turn until acceleration because the air/fuel ratio has been thickened and the low-speed Torque has been lowered. I don't know if I am using too much low rpm or more fuel injection.
About air-fuel ratio It's down about 2 from the OEM, so was the OEM simply breathing more air? I guess that means. Since the power is higher than OEM from 5000 rpm onward, does this mean that it is now a high-revving type? I've never been to Circuit, and the OEM had a slower Torque for me. OEM may be a better fit.
Conclusion Isn't this product to lower the air-fuel ratio and make it a high-revving type to increase the maximum output from mid-range RPM? It is not a product that sucks in more air than the OEM to increase the air/fuel ratio and improve fuel economy. Well, if it is turned up to 5000 rpm or later, the acceleration is increased, so it may be better if it is turned. I don't know what the fuel economy will be. However, the last time I refueled, it was over 30, so if I change the way I drive, can I still maintain fuel efficiency? I am not sure.View Detail
[How is it used? Installed on NINJA2 Helmet 50RR as a replacement for K&NFilter. Traveling:Touring, mountain passes Period of use:about 6 years or so Custom contents:Exhaust SystemFull Exhaust System, air cleaner box drilling, RapidMotorcycleEasy installation.
Was the one you received as per Image? As you can see in the image, the product looks almost exactly the same as the K&N.
Was the installation difficult? As with the K&NFilter, I had to insert it with a lot of pressure to get it to go in. I got the rubber part very wet and then inserted it.
How was your experience with it? Compared to the K&NFilter, the intake efficiency was slightly lower. I could feel it. But it was really only a slight decrease. Still, the intake efficiency is much better than OEM. RapidMotorcycleEasy was able to run without difficulty with the same settings as K&NFilter. The car has been run for about 5000km and the filter has been cleaned and reused. I have not had any problems after cleaning. Unlike OEM products, this product can be used for a long time with proper maintenance like K&NFilter. Maintenance restores the performance of the system, so it is important to perform maintenance on a regular basis. Also, the exhaust system was replaced. (Custom exhaust system) then Quantity:It is recommended that the Air Filter be changed to one with better air intake efficiency in Set. It's FI, so it won't improve performance as dramatically as carburetor, but it will still make you a little happier if you do it. The K&NFilter has a Large variable intake efficiency, but is a bit pricey, so I found this product to be more cost effective.
[Included Parts:were they on? None
[Was there anything that disappointed you? Difficult to insert.
(Points and hangs of installation, Items to buy together) Point and hang You can apply silicon grease or silicon spray to the surface of the rubber of this product so that it can be inserted smoothly. I didn't care about it, so I applied Lithium silicon grease and inserted it. (No particular Trouble has occurred.)
Items to buy together K&N Filter maintenance kit (FilterCareService kit) If you purchase the product at the same time, you can use it for a long time while maintaining it. (No problems have arisen when used in this product.)
Washing Filter (It can be this product, or another, or you can keep the OEM.)View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!