GIGA BIKE FACTORY Ignition Relocation Bracket
Bought it to install on my SR 1JR.BALI was left in the part of the hole for fixing and it didn't fit.If you take the BALI, installation is completed without any problem.
 |  |  |
 |  |  |
 | ||
-
| Displacement | 499 | Engine Type | 4-stroke/Air-cooled/SOHC/2 Valve |
| Maximum Output (ps) | 32ps(24kw)/6500rpm | Maximum Torque (kgf/m) | 3.7kg・m(36N・m)/5500rpm |
| Vehicle Weight (Dry Weight) | 153 | Fuel Tank Capacity liter | 12 |
![BRISK BRISK LGS Plug [DOR14LGS]](http://img-webike-370429.c.cdn77.org/catalogue/webike_images/0000/0000/0176/23582875_1_TS.jpg)
BRISK BRISK LGS Plug [DOR14LGS]
Last time, in order for the phenomenon which fires off in the low rotation range to occur, I was able to write the impression that it did not seem to be suitable for my Engine Spec. but when I changed the Plug cord from Norogy Hot wire to NGKRacing cable of the standard of the Uotani Coil The starta...
BRISK BRISK LGS Plug [DOR14LGS]
This is a tuning engine with high compression piston. The ignition is a full course of MSA with Vup16 and Votani SP2.The carburetor setting is quite thick to prevent knocking.It seems to have been incompatible with the wide opening acceleration from low throttle because it sometimes lost fire.It's n...
BRISK BRISK LGS Plug [DOR14LGS]
The quality and texture is good, but I don't think I could get that Performance with my SR.Wiseco's High-Compression Piston and High Camshaft may not be compatible with the tuning engine.The ignition system is a full course of 16V boosted by Vup16 and MultiSparked by MSA in addition to a Watani SP2....
POSH Capton Type Exhaust System
We had them on when we had Carburetor Vehicles on our SR.good point1 The exhaust sound is crisp and clear. Stainless Steel has a lighter exhaust sound, which makes Harley riders look back at Level.2 Not only for SR, but also for Ross Barrel style motorcycles (W, ESTRELLA, CB400ss, etc). The full cus...
KIJIMA Grip Heater GH10
I installed it on CRF250L MD38.I couldn't find ThrottleAdapter in the car model information. "Type C. I was able to install it with no problem.The outer diameter of the Grip is the same as the OEM, so it doesn't look out of place at all.It's sure to make your winter rides more fun.
ALCAN hands Black Rubber Grip Gamma
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
NOLOGY Hot Wire
I've been using Norology Hot wire for CB1000SF since it was first released!Product reliability durability performance, proven, so I installed it on my CT125CT110 HUNTER CUB!It's got more torque and it's even easier to ride!I recommend it because it's easy to work with and you can feel the power up r...
KIJIMA Grip Heater GH10
It was possible to install it without a problem in combination with Active High throttleEVO2.When attaching the Grip heater to the SS, the thickness is quite a problem, but this one is 32φ as good as NORMAL due to the integrated molding.The ThrottleAdapter is replaceable, and the largest one is equi...
YAMAHA Casting Wheel Set
It is the installation to 2020 MODEL.One of the weaknesses of the SR is its weakness in the wind, but this has been improved.On the other hand, the SR's nimble turning ability might be spoiled, but I didn't feel any negatives.It's a very good product.Style:It depends on the taste, but I think it is ...
(0.0)
Newest activities
-
User137547 joined the group ウェビックSR500公式グループ 1 month ago
-
User115878 joined the group ウェビックSR500公式グループ 2 months ago
-
User279010 joined the group ウェビックSR500公式グループ 2 months ago
-
User271590 joined the group ウェビックSR500公式グループ 2 months, 4 weeks ago
-
User274400 joined the group ウェビックSR500公式グループ 3 months ago
Newest active members
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING