Fits: YAMAHA YZF-R7 21- RM39, YAMAHA YZF-R6 17-20 RJ27, YAMAHA YZF-R3 19- RH12, YAMAHA XSR 900 16-21 RN43, YAMAHA XSR 900 22-
I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer.View Detail
Fits: YAMAHA YZF-R1 09 YZFR1YCY Oil Pump, YAMAHA YZF-R1 09 YZFR1YCW Oil Pump, YAMAHA YZF-R1 09 YZFR1YCW Oil Pump, YAMAHA YZF-R1 09 YZFR1YCL Oil Pump, YAMAHA YZF-R1 09 YZFR1YCL Oil Pump
This is a replacement for the original o-ring for the oil pump on the 2020 MT10. Not really sure how this started leaking but the result was a lot of oil drips on the floor of my clean garage. Initially, this came in for a service and after being left over night, the oil was present and needed addressing asap. I found the culprit and then checked for the part number by using the tools Webike provide on their help pages. I also cross referenced with Yamaha schematics as if this leaks, there may be a reasonable explanation and a superseded part. Not on this occasion but the part was relatively easy to find anyway. The price was peanuts and a little better than could be sourced locally. I had a few other parts in my order and got them all shipped using EMS as they get my orders to me fast and efficiently. 5 days from being shipped for Webike warehouse and my order was at my door. The parts inside were all really well packaged and the smaller parts, like this, were kept nice and secure in a bubble wrap envelope. The o-ring is nothing to write home about but it does haver a good anmount of flex but has a rigid feel to it. Fitting was not tricky but making sure it was seated correctly was imperative. Job done, now on to the usualy service. Thanks Webike. View Detail
Fits: YAMAHA FZ10 17 FZ10HCGY Cowling 1, YAMAHA FZ10 17 FZ10HGY Cowling 1, YAMAHA FZ10 17 FZ10HB Cowling 1, YAMAHA FZ10 17 FZ10HCB Cowling 1, YAMAHA MT10 18 MT10JGY Cowling 1
Ok so this was a bit of an error on my behalf as I did not stop in time when someone brole suddenly in front of me. Not reaaly any bad bump but enough to break the stay on the bike. I did inspect this thoroughly and there was actually 2 breaks to the stay. I am unsure if the part was already faulty or not but anyway, this needed to be replaced as soon as possible. Finding the corret part was not difficult at all as Yamaha schematics show the part you need and aslo, you can check the help pages Webike provide too. The part was a little expensive but for what it would cost locally, this was a bargain. I did have a couple of other smaller parts that I also needed for the bike and got them all shipped together with EMS. I choose EMS as they just get the orders shipped and delivered quickly. My order arrived in 5 days from shipping. The box everything came in was well packaged and the stay itself also came in the standard Yamaha box. The stay was perfect upon arrival and there was no damage. It is a really intricate piece of kit. The joints are all good and feel pretty sturdy. The finish is a nice satin black smoothed out paint. Although you cannot see this part oncve fitted, it was nice to see that yamaha actually took the time and care to make the paint finish really good. Fitting was not too bad, it is all the putting the rest of the bike back together that is the annoying part. Very pleased with the purchase. Thank you Webike for the care with my partsView Detail
Fits: YAMAHA MT-10 SP 22, YAMAHA MT-10 BW83, YAMAHA MT-10 22, YAMAHA MT-10 , YAMAHA MT-10 B676
This was something I had been meaning to buy but never got around to it. My mistake as I ended up with a small scratch from my jacket on the tank. Rather than get a respray, I just thought it best for now to get a new tank pad which will cover the scratch and then also add protection for any future scuffs. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on teh genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks WebikeView Detail
Fits: YAMAHA MT-10 16, YAMAHA MT-10 17-21
As you know, if you ride with good motorcycle boots, they do have a tendancy to rub the frame in places. It's just how it is. These boot guards are a perfect addition to help prevent this and also give a good look to the frame in general. Even though you will probably never need for them to be grippy, they are anyway with a kind of sand paper feel about them. I have used R&G products before and they do know what they are doing when it comes to protection. All their products just fit, there is no having to trim anything as they make each kit specific to YOUR bike. As I already had other tank protector in the basket, I added these boot guards. Becasue I had other items in the basket for the order, the courier cost was very good value and spread out over the entire purchase. It is a lot cheaper to have more than one item to ship that having multiple items. EMS fast is the service I used this time. Their delivery is always within a week and this is even the case over a weekend. My order arrived to me in the UK in 5 days flat. All the items in my order were packed really well and neatly inside the outer box. Webike warehouse even seal the box on all the edges so nothing can be lost in transit. The package was also filled with extra bubble wrap in any empty space so there was also no damage from items moving around inside the box. All arrived 100% perfect. These boot guards are nice and flexible and easy to fit, I always mark the guards or what ever protection you against the surface I am going to attach to using a white pencil on various edges. This measn when I come to installing, I know they will be in the right place first time. Probably easier ways but this works for me. The instructions tell you to lightly heat the surface and pad with a heat gun, I found that a hairdryer did a great job as my heat gun was elsewhere. Just take your time and you will be just fine. Very happy with the final result. Brilliant, thank you Webike View Detail
Fits: YAMAHA FZ10 17 FZ10HGY Fuel Tank 2, YAMAHA FZ10 17 FZ10HCGY Fuel Tank 2, YAMAHA FZ10 17 FZ10HCB Fuel Tank 2, YAMAHA FZ10 17 FZ10HB Fuel Tank 2, YAMAHA MT10 18 MT10JL Fuel Tank 2
About quality and textureQuality is really good, the texture of the actual product is smooth but has slight ridges to help with gripAbout the feeling of useThis is a part that helps you keep hold with your kneesProducts to buy togetherI bought this product along with the other side to have a matching pairDifficulty of installationNo problems with installation as they just clip inCost performance and comparison with other productsThe cost was really good value and I do not think you can buy another product that does the same thingAbout shipping and packagingShipping was really good value and the packaging it all came in was good too. Nothing was any issue.Any concerns, cautions, or advice when purchasingNo problems about ordering from Webike. I know what I am buying.View Detail
Fits: YAMAHA MT10 (MT10MB) 21 Fuel Tank 2, YAMAHA MT10 (MT10MCB) 21 Fuel Tank 2, YAMAHA MT10 (MT10MCL) 21 Fuel Tank 2, YAMAHA MT10 (MT10ML) 21 Fuel Tank 2
About quality and textureQuality is really good, the texture of the actual product is smooth but has slight ridges to help with gripAbout the feeling of useThis is a part that helps you keep hold with your kneesProducts to buy togetherI bought this product along with the other side to have a matching pairDifficulty of installationNo problems with installation as they just clip inCost performance and comparison with other productsThe cost was really good value and I do not think you can buy another product that does the same thingAbout shipping and packagingShipping was really good value and the packaging it all came in was good too. Nothing was any issue.Any concerns, cautions, or advice when purchasingNo problems about ordering from Webike. I know what I am buying.View Detail
Fits: YAMAHA YZFR1S (YZFR1SJGY) 18 Exhaust, YAMAHA YZFR1S (YZFR1SHCGY) 17 Exhaust, YAMAHA YZFR1S (YZFR1SJCGY) 18 Exhaust, YAMAHA YZFR1S (YZFR1SHGY) 17 Exhaust, YAMAHA YZFR1S (YZFR1SGW) 16 Exhaust
I was changing my exhaust and the muffler gaskets that were already there had suffered too much damage to reuse. Not such a problem as I know I can source these pretty easily. Finding the correct part number was fairly straight forward, I used Webike tools in the help section and cross referenced for my own peace of mind on Yamaha schematics. The cost from Webike was brilliant value and a little better than I could source locally. With a few other items in my order, I had them all shipped using EMS as they just do the job right. Combineing items in my order also saved a bit of money on the shipping too. Bonus. My order arrived in 5 days from initial shipping from Webike warehouse. Very good timeframe from Japan to the UK. The order was packaged really well and any smaller parts were well wrapped and surrounded by bubble wrap. The gaskets themselves came in a Yamaha box and all individually packed. They are really cool looking gaskets with 2 types of material. I believe these also fit a few other models apart from the MT10. Anyway, they fitted perfectly and the exhaust once fitted back does not blow or have any leaks. Very happy with the purchase. Thank you Webike, great work. View Detail
Fits: YAMAHA FJR1300E (FJR13ESER) 14 Front Master Cylinder, YAMAHA FJR1300E (FJR13ESECR) 14 Front Master Cylinder, YAMAHA FJR1300AE (FJR13AEXCS) 08 Front Master Cylinder, YAMAHA FJR1300AE (FJR13AEWC) 07 Front Master Cylinder, YAMAHA FJR1300AE (FJR13AEW) 07 Front Master Cylinder
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View Detail
Fits: YAMAHA XSR700 (XSR700LCW) 20 Front Master Cylinder, YAMAHA XSR700 (XSR700KGY) 19 Front Master Cylinder, YAMAHA XSR700 (XSR700KCGY) 19 Front Master Cylinder, YAMAHA XSR700 (XSR700JR) 18 Front Master Cylinder, YAMAHA XSR700 (XSR700JL) 18 Front Master Cylinder
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always.View Detail