I received my Daytona Multi Wing Carrier and, as stated in the listing, the installation instructions were in Japanese. Needless to say neither Bing nor Google Translate were very much help. Through other means I was finally able to fully translate them to English but they were inadequate. Here are my own set of instructions which I used to install the carrier on my 2016 Honda NC700X:The carrier rack's mounting rails are intended to be installed beneath bikes the current grab rails using the included longer screws.1. Open passenger seat.2. Remove main seat by removing bolts and washers (2pc) and set everything aside.3. Remove passenger seat hinge at the top by taking out retaining pin (be careful not to lose washer), then take off washer and set both aside.4. Remove grab rail bolt caps (take care not to lose them as they pop off) and set aside.5. Loosen grab rail bolts. (2pc per side)6. Attach half of included foam tape to each carrier rail along front edge of curved carrier arm mount point on the bottom side. (The point where the carrier plate meets the rails is considered the back and top fo the mounting rail.) 7. Remove the grab rails and set the bolts and washers aside.8. Loosely re-install the grab rails with corresponding carrier rail beneath them using the included long bolts and old washers. (Be careful while positioning them around the plastic fairing.)9. Loosely attach carrier plate to carrier rails using included bolts and nuts.10. Tighten grab rail bolts and carrier plate bolts.11. Replace grab rail bolt caps.12. Re-attach original seat using original bolts and washers.13. Re-attach passenger seat hinge by putting back washer and retaining pin.14. Close passenger seat.Hope this helps someone, who was as lost as I was, get their carrier installed.
Fits: HONDA NC700S ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S DCT/ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1000001 or later, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1100001 or later
Nice product and fits as stated. Quick shipping and excellent service. I would buy from Webike again. Quick dispatch and good supportView Detail
Fits: HONDA NC700S ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S DCT/ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1000001 or later, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1100001 or later
Super fast delivery with a good protection packaging. Easy to install and a better shaped base plate compared with another brands.View Detail
Fits: HONDA NC700S ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S DCT/ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1000001 or later, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1100001 or later
It was decided to DAYTONA that the load capacity was 6 kg and the load was the largest as Universal Type and it was to be able to put the luggage together with Seat.
Installation also included Bolt is solid, it is attached with BoltON, if it is Brand of DAYTONA, it is safe because I think that there is no mistake in the welded part.
It is recommended because I think that it is a sufficient product without dare choosing OEM Carrier of many times price.View Detail
Fits: HONDA NC700S ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S DCT/ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1000001 or later, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1100001 or later
attachment, when removing the Spring of a Rear seat, it flew carelessly and has lost.If it is made to get
Attachment is also easy and it clings firmly.Appearance is also smart and user-friendliness is also good.Although there were notes at the time of
attachment, when removing the Spring of a Rear seat, it flew carelessly and has lost.If it is made to get notes to be conspicuous to a slight degree, I will think that it is better.The one who did slanting reading is also bad..It is stylish after
attachment and it is very pleasing.View Detail
Fits: HONDA NC700S ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S DCT/ABS [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700S [RC61] 12 [Frame No.]RC61-1000001 to 1099999, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1000001 or later, HONDA NC700X ABS [RC63] 12 [Frame No.]RC63-1100001 or later
Since color had only the Black, the Gold was painted and equipped on a certain calm day which is drying winter.However, if it does not take care, paint application separates and it is always restoration.Therefore, practicality is deficient in me.It is only a Dress-up up.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING