Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Specification] Heat treatment: carburizing and nitriding treatment Durability: 10000 to 30000km (*)
*The stock size chain cannot be used on vehicles that are set up for conversion, and must be converted to the correct chain size. *The color and shape of the delivered product may differ from the picture. *If you change the number of sprockets from the stock, it may not be able to be installed on some models. *Durability is for reference only.It depends on your riding style, chain size and maintenance condition. *Offset figures are for sprockets only. *The actual offset of the chainline from the stock value will vary from model to model.Please note that if the stock sprocket has an offset, that value will be subtracted.(It depends on each model) *Not all of the available tooth numbers can be installed without interference to the vehicle body.Please confirm the installation of each vehicle body according to the number of teeth by yourself. *Not all sprockets have lightweight holes. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
The synergistic effect of high hardness by high level quenching and anti-corrosive treatment that does not deteriorate the material boasts excellent durability.When carburizing and nitriding heat treatment is applied to steel materials, it is very difficult to maintain high-precision dimensions because of the different expansion and contraction rates.Sunstar applies a special heat treatment process using its own facilities and technology.
Sprocket Course - Basics - Frequent maintenance is the secret to riding your bike for a long time!SUNSTAR
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I ran 28,000 kilometers, but Sprocket was not scraped at all, I was lighter than OEM and I was good at switching reliability, did I also have made it the same?View Detail
I could install it with no problem with reliable Brand etc.. I think whether durability is also a problem. I ran Tsukuba at once, but it was easy to run. There is the same R600 in the same class and the distance between the cars is getting shrunk by BackStraight. By the way, my weight was 10 kilos or more light seemingly light, my arms seemed to be good, and my age seemed to be young. It is perfect for shrinking Time cheaply. Although I set 15 this time, I thought that I would like to try 14. Afterwards, I think that it is better to chow the Automatic shifter together because the climb rising faster. I also asked for it together, but it is still in stock because it is said that it takes 1 month and a half for delivery without inventory.View Detail
I bought it as a reliable Brand over OEM Product. Although it is a plain part, I think it is a very important part in driving safety. If so, Cost performance is high. It's nice to understand Manufacturer's website.View Detail
I purchased it for FrontSprocket of 2010 formula ZX - 10R. NORMAL is 17T, but I changed it to 16T of 1 DOWN to make it more important for acceleration. Three companies that are selling FrontSprocket of this size are SUNSTAR, XAM, AFAM, but as long as there is no car model and size not being sold, SUNSTAR of 100% OEM adoption among them is very high reliability , It becomes the first choice of purchase. In fact, compared with 15T of AFAM which is rolling at home after purchase, its surface finish is AFAM (It does not affect the performance, but a little rust floated immediately after purchase) Unlike Black, it was dyed up, of course it was finished without rust and BALI, meat extract etc etc. Weight reduction has not been done, but you can feel a solid point of practical utility. It can be attached to the car body sliding into the Spline of the Drive shaft, and the tool precision is also very high. Regarding durability, most of Motorcycle has been on the race (There are a couple of units) , Its durability is exactly the same as OEMSprocket etc.. It is confirmed that the performance is good in Aftermarket parts, but it does not apply to theory that it is inferior in durability. I will continue to buy SUNSTAR as the first candidate as long as there is a size that matches the purchased MotorcycleView Detail
I installed it on the DAYTONA 675 I ran 70000 kilometers.
This time I exchanged Rear sprocket and Chain, so I also exchanged Front for the first time. Usually I was worried what was going on because it was covered with Cover and the contents can not be seen, but I opened it and I did Big. I was going to replace it for 70000 kilometers afterwards and it was like this. It is frightening when I think now that I ride in such a form often. You should protect the exchange Cycle properly.
The OEM has a Ring of Rubber around it, while the MADE IN SUNSTAR I purchased is like a simple gear without Rubber. It is a mystery what role Rubber plays Even if there is nothing, I attach it without trouble, even if I run, there is no interference and there seems to be no problem.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!